CONTENTS
GLOSSARY
SUBJECT INDEX
SEARCH DOCUMENTATION
Sample Problem: Z-Pinch Hohlraum
Setting Up the Grid: Thin Foil in Open Slot
To set up the foil:
Select
Target | Add Object
(or push the Add Object tool button).
Select "Rectangle" for the target component type.
Set the object name to "Foil".
In the
Position
tab of the Object Parameters Dialog:
For the Reference Coordinate System, use "Target Chamber".
Use a cylindrical coordinate system to set the object position.
Set the object position to:
radius
= 2.5 cm,
phi
= 40 degrees.
Use the
polar
orientation angle to 90 degrees (this rotates the rectangle about the y-axis, so that is is vertical).
Use a
azimuthal
orientation angle of 40 degrees.
In the
Size/Gridding
tab of the Object Parameters Dialog:
Set the x-length to 1.8 cm.
Set the y-length to 1.0 cm.
Set surface normals down.
Use 10 grid points in the x-direction.
Use 10 grid points in the y-direction.
Select "OK".
The foil is now added to the graphics window.
Copyright © 2000-2024 Prism Computational Sciences, Inc.
VISRAD
19.3.0